Table of Contents
Advertisement
CAMERA Settings
5
BRIGHT
This lets you set the image brightness to one of
five settings.
Setting range: 1 to 5 (Default: 3)
Note: The larger the setting, the brighter are the
images.
6
ELECTRONIC SHUTTER
This setting is used when IRIS is set to "AI".
Setting range: 1/60, 1/100, 1/250, 1/500,
1/1000, 1/2000, 1/4000, 1/10000
7
BLC (backlight compensation)
Available settings:
•
OFF: Backlight compensation is not carried
out.
•
MULTI (multiple point photometry):
Backlight compensation is calculated from
the whole image to obtain correct images.
•
CENTER (center focus photometry):
Backlight compensation is calculated based
on the center of the image to obtain correct
images.
8
WHITE BALANCE
Available settings:
•
AUTO (automatic white balance): The
white balance is adjusted automatically to
obtain correct colors even if the light source
changes.
•
INDOOR: This setting is for when the
camera is being used indoors under
fluorescent lighting.
•
OUTDOOR: This setting is for when the
camera is being used outdoors under natural
sunlight.
•
MANUAL (manual white balance): This
lets you make manual fine adjustments to
the white balance. It can be used when the
"AUTO" setting does not give correct color
reproduction.
Setting manual white balance (MANUAL)
Click the
and
adjust the settings for R (red) and B (blue).
Setting range: 0 to 255
Note: The red or blue component becomes
stronger when the setting is higher.
9
AGC Gain
If the images are too dark, change the maximum
[AGC Gain] value to make the images lighter.
The default setting is "0".
Available settings:
OFF: AGC is not used.
–6 dB, 0, +6 dB, +9dB
F
GAMMA
Select a value that is suitable for the monitor
being used.
Setting range: 1, 0.8, 0.6, 0.45, 0.3
G
[PRESET] button
Click this button to return all settings to their
factory defaults. The preset confirmation dialog
box will be displayed. Click the [OK] button to
return the values to their factory defaults.
– 34 –
ID2
ID3
buttons repeatedly to
English
Advertisement
Table of Contents
