Table of Contents
Advertisement
Network Camera Settings
In order to use the camera as a network camera, you must make the following settings in the order
given.
When making network connection settings, the network settings must always be made first.
1
Installation of Plug-in Software (p. 13)
Use the accessory setup CD-ROM to set up the computer.
2
Computer and Camera Connections (p. 16)
Connect the computer and the camera directly, and access the camera using the computer's web
browser.
3
Network Connection Settings (p. 18)
More than one camera can be connected to the same network, but before the cameras can be
connected, you need to make various settings for each camera such as assigning IP addresses.
The following three types of network connections can be made. Set the cameras in accordance
with the purpose of use.
A
NETWORK SET Settings (p. 19)
These settings are for when the camera is being connected to a LAN. This is the normal type
of connection to use for this camera.
B
WIRELESS LAN SET Settings (p. 21)
These settings are used when connecting the camera to an access point for a wireless LAN.
C
PPP (dial-up) SET Settings (p. 23)
These settings are used when using a modem to connect the camera to the Internet.
Note: If using a modem to make a dial-up connection, you will need to use the Network Archiving
software that is sold separately.
– 12 –
English
Advertisement
Table of Contents
