Table of Contents
Advertisement
Network Camera (Wired LAN) Settings
5 NETWORK SET Settings
Click the [NETWORK] menu select button.
These settings are used in order to connect the camera to the network. After these settings have been
completed, you may also have to make wireless LAN settings or PPP settings. More than one camera
can be connected to the same network, but in order to do this, you will need to make settings for each
camera such as assigning separate IP addresses before connecting the cameras to the network.
The NETWORK SET screen will be
displayed.
The default settings for the items 1 to 6, F
will be displayed automatically.
The settings for 7 to 9 are settings that
relate to the DNS server. The setting
methods differ depending on the network
environment. Ask your network system
administrator for details.
Once you have completed making the
settings, click the [SET] button. The setting
change confirmation screen will be displayed.
1
IP ADDRESS
2
SUBNET MASK
3
GATEWAY
Note: Check with the network system
administrator or Internet Service Provider
if you need to change the IP ADDRESS
1, SUBNET MASK 2 or GATEWAY 3
settings.
1
2
3
4
5
6
4
Set the password. (PASSWORD (4-8))
There are three password settings that can be
made for different access levels (3333:
Administrator, 2222: Operator and 1111: User).
Separate passwords can be set for each level.
(Table 1)
The access level is determined by the username
and password that are entered after the settings
in "Wired LAN Settings" have been made. The
default setting for the access level is
"Administrator" (ID3, 3333) which allows all
operations to be carried out.
5
NETWORK SPEED
This sets the speed of data transmission by the
camera.
Available settings:
NO LIMIT (Default setting: No limit for
transmission speed), 64, 128, 256, 512,
1024 (Kbps)
– 20 –
7
8
9
F
English
Advertisement
Table of Contents
