Table of Contents
Advertisement
Network Camera Settings
A NETWORK SET Settings
These settings are used in order to connect the camera to the network.
Note: Check with the network system administrator for details on settings related to the network itself,
such as IP address settings.
1
2
3
4
1
Click the [NETWORK] button in the main
menu.
The initial NETWORK SET window will be
displayed. The default settings for each item
will be displayed automatically. Check with
the network system administrator or Internet
Service Provider if you need to change any
of the following settings.
•
IP ADDRESS
•
SUBNET MASK
•
GATEWAY
English
2
Set the password.
There are three access levels available
(User, Operator and Administrator) and
separate passwords can be set for each
level. The range of operations varies for
each level as shown in the table below.
Username
Access level
Password
(default)
Live image
viewing
Menu
settings
Main menu
button
operation
v: Camera settings only
Note: The passwords are set as shown in the
table above at the time of shipment from
the factory. However, it is recommended
that you change them whenever possible
for security purposes.
3
Once you have finished changing the
settings, click the [SET] button.
– 19 –
Default settings displayed
Reset if necessary
ID1
ID2
Adminis-
User
Operator
1111
2222
F
F
T
F
T
v
ID3
trator
3333
F
F
F
Advertisement
Table of Contents
