Advertisement
CONNECTIONS AND INSTALLATION
Basic connections for monitoring or recording
The peripheral devices (VCR, monitor, etc.) and cables are sold separately.
1
Make the video signal connection between the camera and the monitor or time lapse
VCR.
2
Plug the AC adaptor to a wall outlet.
Adjust the picture on the monitor using the Brightness and Contrast controls.
VIDEO IN
Time lapse VCR
(sold separately)
Multiple cameras connection
You can use multiple cameras by connecting them a camera switcher or a quad unit (sold
separately), then conducting the surveillance from one location by splitting the monitor screen
to view the image from each camera, or by switching the image from each camera on the
monitor screen. For detailed information, please refer to the installed devices instruction
manuals.
Fig. 1
VIDEO OUT VIDEO IN
Monitor
(sold separately)
(Example of connection to a monitor)
VIDEO IN
: VIDEO IN
: VIDEO OUT
NOTE: (Fig. 1)
•
Make sure the AC adaptor is not
connected to the wall outlet before
connecting it to the 12 V DC input
terminals.
•
When making the connections be careful
to respect the polarity and not to
shortcut the terminals.
8
English
Advertisement
