Connections And Installation - Sanyo VCB-9312P Instruction Manual

CONNECTIONS AND INSTALLATION

Connecting the coaxial cable horizontally
1
Cut and prepare the extremity of the coaxial cable (sold separately), as illustrated.
2
Attach the coaxial cable to the base.
Loosen the VIDEO OUT terminal screw (A) and the GND terminal screw (B), then insert the
center wire of the coaxial cable in the VIDEO OUT terminal and make sure the shielding
mesh part of the cable is located into the GND cable clamper, then tighten both screws (A
and B) to attach the cable.
Connecting the coaxial cable vertically (using the vertical holder
plate)
1
Cut and prepare the extremity of the coaxial cable (sold separately), as illustrated.
2
Loosen the VIDEO OUT terminal screw and remove the GND terminal screw.
3
Insert the coaxial cable into the GND terminal clamp (a), then attach the clamp to
the supplied vertical holder plate (b) using the screw (c) from the second GND
terminal.
4
Attach the vertical holder plate to the GND terminal using the terminal screw, then
insert the centre wire of the coaxial cable into the VIDEO OUT terminal and tighten
the terminal screw.
5
English
1
1
(Return the shielding mesh here)
A
2
c
B
a
b