Music On Hold - Snom 715 User Manual

snom 715 User Manual
3. Click on "Apply" and "Save".
4. Press to save your selection
5. Press for two secondc to return to the idle screen.
M
usic on hold
As of firmware version 8.7.3.8 firmware downloads include a music on hold (MoH) that is saved locally
on the phone. The default setting for playing music to callers on hold is "off".
• Enabling MoH:
1. Open the Advanced page of the phone's web interface.
2. Click on the Audio tab.
3. Change the setting of Play music during hold to "on".
4. Click on "Apply" and "Save".
• You can replace the MoH provided by snom with a customized, either during firmware or separately,
as described below. In this case, please keep in mind:
Music - the musical composition itself as well as audio recordings - is
covered by copyright laws; their use in the form of MoH is subject to
licensing fees in most countries. It is your responsibility to comply with
the laws and terms of copyright in your country!
The MoH (mono, sample rate 8000Hz) consists of simple RTP packets (without header, Codec
G711u (uncompressed raw headerless pcmu file)) which are stored in the applications directory in
a file called moh.wav. To replace the stored music, proceed as follows:
1. Convert you music to the format "uncompressed raw headerless pcmu file" with an audio
editor; there are some free audio editors available, for example Audacity and Free Audio Editor
(as of September 2012). The size of the file will be checked by the software. It must not
exceed the following maximums:
3xx phones: 128 kB
7xx- und 8xx-Telefone: 1 Mb
2. Save your music on a TFTP server.
3. Save an XML file with the URL to the TFTP server on a web server. Example (don't forget to
replace the fictional IP address by the actual one!):
<?xml version="1.0" encoding="utf-8" ?>
<uploads>
<file url="tftp://192.168.11.18/moh.wav" type="moh" />
</uploads>
4. Open the Advanced page of the phone's web interface.
5. Click on the Update tab.
6. Enter the URL of the XML file in the text field of Setting URL ein and click on Apply.
Example: http://192.168.11.18/prov/upload_tmp.xml
The XML file will be read during the next reboot, and the file stored on the phone will be
replaced by the file stored on the TFTP server.
7. You should now reenter your usual provisioning server into the text field of Setting URL.
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
Customizing the Phone Settings
69