DIVAR IP 5000
7
Advanced setup - dual network
DIVAR IP systems support the separation of networks. Users can
connect both network interfaces to two different switches and
configure the TCP/IP settings. This allows the separation of
devices and public network.
By default both network interfaces are combined to one single
network interface.
To separate the network interfaces:
1.
2.
3.
4.
Bosch Sicherheitssysteme GmbH
Open a web browser from any PC in the network.
In the address bar of the web browser, enter http://
mydivar/configurationsite or http://<IP address
of DIVAR IP>/configurationsite, then press ENTER.
The configuration is displayed.
In the Configuration window, expand System, click
Network, deactivate the teaming mode and configure the
network interfaces.
Enter your changes and save the configuration.
Advanced setup - dual network | en
21
2016.03 | V1 | DOC