5.2
Configuring ZigBee Setting
1.
Launch the "ZT Configuration Utility" and click the [ZT Series] button.
2
. Click the [Serial Port] icon and then select the COM Port number.
1
2
3.
After selecting the COM Port number, a list of model numbers will be
Select the name of the module that you want to configure. After
button, the utility will begin checking the connection.
3
ICP DAS, ZT‐USB Series User Manual, Version 1.0
Copyright @ 2013 by ICP DAS Co., Ltd. All Rights Reserved.
displayed.
clicking the
Page 23