Introduction To The Zt-Usb Series - ICP DAS USA ZT-USBC User Manual

2
Introduction to the ZT‐USB Series
The Basis of ZT-USB Series Product
The ZT-USB series modules are small-sized wireless ZigBee converters based on
the IEEE802.15.4 standard that allow USB interface to be converted to a personal area
ZigBee network. The typical transmission of ICP DAS ZT-USB series ZigBee products is
60 meters (LOS, line of sight), with a transmission frequency range of between 2.405
GHz and 2.48 GHz, separated into 5 MHz sectors, providing 16 channels and 16384
PAN IDs. ZT-USB series is not only a long distance wireless converter but also can act a
ZigBee router to extend the transmission range and improve the quality of wireless
signal.
ZT-USB series products are specification for a suite of high level communication
protocols using small, low-power digital radios module, which are fitted the ZigBee 2007
(ZigBee Pro) of ZigBee Alliance. In the ZigBee network, it is only allowed one ZigBee
Host and called "ZigBee Coordinator", ZT-USBC is used to initialize and manager the
routing. In addition, One ZigBee network are able to manager 255 ZigBee router and
responsible for receiving or bypassing data from parent or child node.
The Benefits of ZT-USB Series Product
A Windows compatible GUI configuration utility is available. The utility allows users
to set different configurations based on the type of application, together with several of
required ZigBee variables such as Pan ID. The friendly user interface is also helping
user be familiar with ZT-USB and ZT-2000 series.
For more information, please refer to the relevant documents for these devices,
which can be found at following link:
http://ftp.icpdas.com/pub/cd/usbcd/napdos/zigbee/zt_series/document
ICP DAS, ZT‐USB Series User Manual, Version 1.0
Copyright @ 2013 by ICP DAS Co., Ltd. All Rights Reserved.
Page 5