4. Choose serial baud rate and data format. The default setting is 115200bps and
N,8,1.
4
5. Once a connection is established, select either the [Default] or the [Wizard]
function from the settings mode page.
5
6. Whether you select either the [Default] or the [Wizard] option for performing
configuration, both are used to configure the Pan ID, Node ID, RF Channel,
Power, Baud rate, Data Format, Application Mode and so the relevant
parameters.
ICP DAS, ZT‐USB Series User Manual, Version 1.0
Copyright @ 2013 by ICP DAS Co., Ltd. All Rights Reserved.
Wizard
Default
Page 24
RF