Boca Systems Micro Plus User Manual page 25

The FGL20 and FGL40 printers allow the user to adjust various printer options through the
control panel.
MENU
TEST
CHOICES
To access and use the OPERATOR MENU, follow these steps:
1. Ticket stock should be loaded into the printer. The LCD window displays
FGL40B# or FGL20B#
(# - revision number, incremented for minor revisions ( B - revision letter,
incremented for major revisions)
2. Press both MENU and TEST switches simultaneously for about three seconds.
The LCD window displays OPERATOR MENU! .
3. To scroll through the menu topic, use MENU stopping on the topic you wish to
change.
4. Press CHOICES to scroll through choices in the selected topic. NOTE: The
printer displays a blinking cursor for the values presently stored in the printer.
5. Once you have found the new value you want, press TEST. The LCD window
displays EXIT AND SAVE?. If you wish to save the new value, press TEST
again.
6. If you do not wish to save the new value, press MENU. The LCD window
displays JUST EXIT?. Press TEST to exit the OPERATOR MENU without
saving new values or press MENU to enter back into the OPERATOR MENU.
CHECK
PAPER
Selects proper menu topic (baud rate, cut count, etc.)
PAPER
JAM
Enters new value / Also saves new values.
DATA
Scrolls through choices in individual menu topics.
READY
Appendix A - Operator Menu Options