Table of Contents
Advertisement
Channel
8-CH
Channel
6-CH
Configuration
(Standalone)
Static Color Mode
Automatic Mode
Program Speed
Sound-Active
Mode
Freedom™ Strip Hex-4 User Manual Rev. 1
Function
Dimmer 1
1
Red 1
2
3
Green 1
Blue 1
4
5
Amber 1
White 1
6
UV 1
7
Strobe
8
Function
Red
1
Green
2
Blue
3
Amber
4
5
White
UV
6
Set the product in one of the standalone modes to control without a DMX controller.
Connect the product to a suitable power outlet.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
To run the Freedom™ Strip Hex-4 in static color mode, do the following:
1.
Press <MENU> repeatedly until C-- shows on the display.
2.
Press <ENTER> and C 1–C 63 will show on the display.
3.
Use <UP> or <DOWN> to select a static color.
4.
Press <ENTER>.
To run the Freedom™ Strip Hex-4 in automatic mode, follow the instructions below:
1.
Press <MENU> repeatedly until P-- shows on the display.
2.
Press <ENTER> and P 1–P 9 will show on the display.
3.
Use <UP> or <DOWN> to select an auto program.
4.
Press <ENTER>.
To change the program speed in the Freedom™ Strip Hex-4, do the following:
1.
Press <MENU> repeatedly until S-- shows on the display.
2.
Press <ENTER> and S 1–S100 will show on the display.
3.
Use <UP> or <DOWN> to increase or decrease the speed.
4.
Press <ENTER>.
To run the Freedom™ Strip Hex-4 in sound-active mode, follow the instructions below:
1.
Press <MENU> repeatedly until Snd shows on the display.
2.
Press <ENTER>
The product will only respond to low frequencies of music (bass and drums).
Value
Percent/Setting
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
000ó010 No function
011ó255 Strobe (slow to fast)
Value
Percent/Setting
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
000ó255 0–100%
Page 19 of 25
Advertisement
Table of Contents
