Dmx Control; Loss Of Signal Setting - Chauvet Colorado Zoom WW tour User Manual

Operation

DMX Control

Loss of Signal
Setting
-10-
In this mode, each product will respond to a unique starting address from the DMX
controller. All products with the same starting address will respond in unison.
1. Select a DMX personality as described in
2. Set the running mode:
a. Go to the RUN main level.
b. Select the DMX programming level.
3. Set the starting address:
a. Go to the DMX main level.
b. Select the starting address (001~512).
The highest recommended starting address for each DMX mode are as follows:
This setting controls how the product will respond when the DMX signal is lost.
1. Go to the SET main level, then select DERR.
a. Select SAVE to make the product use the last command used when the signal is
lost.
b. Select BLAC to turn off the all the LED's when the signal is lost.
DMX Personality.
DMX Mode DMX Address
508
STD.W
510
STD.P
512
UNO
COLORado™ Zoom Tour WW User Manual Rev. 05