Table of Contents
Advertisement
Operation
Configuration
(Standalone)
Auto Programs
Master/Slave
White Balance
Static Fixed
Color
Static Manual
Color
-10-
Use standalone configuration to operate the product without a DMX controller.
Auto programs allow for dynamic RGBA color mixing without a DMX controller.
1. Go to the Auto Show main level.
2. Select the desired auto (Auto 0–4).
3. Select the desired speed (Speed 0–100).
You cannot edit any of the auto programs.
The Master/Slave mode allows a group of COLORdash™ Accent Quads (the slaves) to
simultaneously duplicate the output of another COLORdash™ Accent Quad (the master)
without a DMX controller.
1. Set each of the slaves:
a. Go to the Master/Slave main level.
b. Select Slave.
2. Set the master:
a. Go to the Master/Slave main level.
b. Select Master.
c. Select an auto program as explained in
·
The master is the one that runs a program whether in Auto, or Static Color mode.
·
Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master.
·
The master should be the first product in the daisy chain.
This setting allows for selection of the white color shown by the COLORdash™ Accent Quad
when the color setting is RGBA and the DMX controller's red, green, and blue faders are set to
255.
1. Go to the White Balance main level.
2. Select a color (R, G, or B).
3. Select a color value (000–255).
4. Repeat for the other colors.
The values of R (red), G (green), and B (blue) configured will define the color temperature
shown when the RGB faders are set to 255 if SET > COLR > RGBW is active.
The Static Fixed Color mode allows for permanent RGBA presets without a DMX controller.
1. Go to the Static main level.
2. Select Fixed Color.
3. Select the desired color (R, G, B, A, GB, R B, RG, RGB, R A, G A, BA, RG A, R BA,
GBA, or RGBA).
The Static Manual Color mode allows for permanent RGBA color mixing without a DMX
controller.
1. Go to the Static main level.
2. Select Manual Color.
3. Select the desired color (R, G, B, or A.
4. Select the color value (000–255).
5. Repeat for the other colors.
Auto
Programs, or a static mix of colors.
COLORdash™ Accent Quad User Manual Rev. 2
Advertisement
Table of Contents
