Table of Contents
Advertisement
Setup
Mounting
Orientation
Rigging
Procedure
Product Mounting
Diagram
-8-
Before mounting this product, read and follow the
Always mount this product in a safe position and make sure there is adequate space for
ventilation, configuration, and maintenance.
The COLORado™ Zoom Tour WW consists of a double-bracketed yoke and the body of
the fixture. CHAUVET® recommends using the following general guidelines when
mounting this product.
When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
Make sure to mount this product away from any flammable material as indicated in the
Safety Notes
section.
Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
If hanging this product, make sure that the mounting location can support the product's
weight. Refer to the
Technical Specifications
product.
When hanging this product, always secure to a fastening device using a safety
chain/cable (not included).
The COLORado™ Zoom Tour WW comes with a double-bracketed yoke to which you can
either attach mounting clamps for hanging or simply use as a floor stand. You must supply
your own mounting clamps. Make sure the clamps are capable of supporting the weight of
this product. You will have to use at least one mounting point per unit.
Overhead Mounting
Safety Notes
for the weight-bearing requirements of this
Clamp
Safety
Cable
COLORado™ Zoom Tour WW User Manual Rev. 05
in this manual.
Double-
bracketed
yoke
Floor Mounting
Advertisement
Table of Contents
