Whites Setting; Whites Setting Factory Reset; White Calibration; Static Color - Chauvet ColorAdo 1-Quad Zoom Tour User Manual

Hide thumbs Also See for ColorAdo 1-Quad Zoom Tour:
Table of Contents

Advertisement

Operation

Whites Setting

Whites Setting
Factory Reset

White Calibration

Static Color

-14-
This setting allows you to select and edit the temperature of the white colors used in channel 6
(Macros) when in the TOUR and C1Q mode, channel 11 when in the TR16 and STD.Y mode, or
channel 19 when in the FULL mode.
1. Go to the CAL main level.
2. Enter the master access passcode as described in Passcode.
3. Go to CAL1.
4. Select a white color (WH.01–11).
5. Select a color (RED, GREN, BLUE, or WHIT).
6. Select a color value (000–255).
7. Repeat for the other colors.
This setting allows you to reset to factory default the white colors used in channel 6 (Macros)
when in the TOUR and C1Q modes, channel 11 when in the TR16 and STD.Y modes, or
channel 19 when in the FULL mode.
1. Go to the CAL main level.
2. Enter the master access passcode as described in Passcode.
3. Go to CALR.
4. Enter the master access passcode as described in
This setting allows you to select the white color shown by the Colorado™ 1-Quad Zoom Tour
when the color setting is RGBW and the DMX controller's red, green, and blue faders are set to
255.
1. Go to the CAL main level.
2. Enter the master access passcode as described in Passcode.
3. Go to CAL2.
4. Select a color (RED, GREN, or BLUE).
5. Select a color value (000–255).
6. Repeat for the other colors.
When selecting CAL > CAL2, you will only be able to define the values of RED, GREN
(green), and BLUE.
The values of RED, GREN (green), and BLUE configured from CAL > CAL2 will define the
color temperature shown when the RGB faders are set to 255 if SET > COLR > RGBW is
active.
The Static Color mode allows for permanent RGBW color mixing without a DMX controller.
1. Go to the STAT main level.
2. Select the desired color or effect (RED, GREN, BLUE, WHIT, STRB, or ZOOM).
3. Select the color or effect value (000–255 for colors and effect, or 00–20 for strobe).
4. Repeat for the other colors or effects.
Passcode
again.
Colorado™ 1-Quad Zoom Tour User Manual Rev. 1

Advertisement

Table of Contents
loading

Table of Contents