Table of Contents
Advertisement
4. Operation
Control Panel
Description
Control Options
Programming
DMX Personality
COLORado™ Zoom Tour WW User Manual Rev. 05
Button
Exits from the current menu or function
<MENU>
Enables the currently displayed menu or
sets the currently selected value in to the
<ENTER>
current function
Navigates upward through the menu list and
increases the numeric value when in a
<UP>
function
Navigates downward through the menu list
and decreases the numeric value when in a
<DOWN>
function
You can set the COLORado™ Zoom Tour WW start address in the 001~512 DMX range.
This enables control of up to 102 products in the 5-channel STD.W personality.
Refer to the
Menu Map
possible main level and a variable number of programming levels for each option. To
go to an option in the desired main level, press <MENU> repeatedly until the main
level shows on the display. Press <ENTER> to select. This will take you to the first
programming level for that option.
To select an option or value within the current programming level, press <UP> or
<DOWN> until the desired option shows on the display. Press <ENTER> to select. In
this case, if there is another programming level, you will see that first option, or you will
see the selected value.
Press <MENU> repeatedly to exit to the main level.
This setting allows you to choose a particular DMX personality.
1. Go to the PERS main level.
2. Select the desired personality (STD.W, STD.P, or UNO).
See the
DMX Values
each personality.
Make sure that the starting addresses on the various products do not overlap
due to the new personality setting.
Function
to understand the menu options. The menu map shows the
section for the highest starting address you can select for
Operation
-9-
Advertisement
Table of Contents
