Table of Contents
Advertisement
Setup
3. Setup
AC Power
AC Plug
Power Linking
-6-
The COLORado™ Zoom Tour WW has an auto-ranging power supply that works with an
input voltage range of 100~240 VAC, 50/60 Hz.
Make sure that you are connecting this product to the proper voltage. To determine the
power requirements for the COLORado™ Zoom Tour WW, refer to the specification label
affixed to the product or the specifications in this manual.
Refer to the
Technical Specifications
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risks of electrocution or fire.
The listed current rating indicates the maximum current draw during normal operation. For
more information, download the document Sizing Circuit Breakers from the CHAUVET®
website: www.chauvetpro.com.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0% to 100% switch.
The COLORado™ Zoom Tour WW comes with a power input cord terminated with a
Neutrik® powerCON® A connector on one end and an Edison plug on the other end (US
market). If the power input cord that came with your product has no plug or you need to
change the Edison plug, use the table below to wire the new plug.
Connection
Wire (US)
AC Live
Black
AC Neutral
White
AC Ground
Green/Yellow
The COLORado™ Zoom Tour WW supports power linking. You can power link up to nine
(9) products at 120 VAC.
This product comes with a power input cord. This product does not come with a power
linking cable; however, a power linking cable is available as an option.
chart.
Wire (Europe)
Brown
Blue
Green/Yellow
COLORado™ Zoom Tour WW User Manual Rev. 05
Screw Color
Yellow or Brass
Silver
Green
Advertisement
Table of Contents
