Installing The Router - NetComm NWL-12-01 User Manual

Installing the router

After you have mounted the router and connected a power source, follow these steps to complete the installation process.
1. Connect equipment that requires network access to the Ethernet port of your router. This may be your computer for
advanced configuration purposes, or your end equipment which requires data access via the NWL-12 Series Router. You
can connect one device directly, or several devices using a network switch.
If you're using PoE as the power source, you need to connect any devices via an available data Ethernet port on your PoE
power source (be it a PoE network switch or PoE power injector).
2. Ensure the external power source is switched on and wait 2 minutes for your NWL-12 Series Router to start up. To check
the status of your router, compare the LED indicators on the device with those listed in the
guide.
www.netcommwireless.com
LED Indicators
NetComm Wireless 3G Light Industrial M2M Router
section of this
19