Oki PACEMARK 4410 Maintenance Manual page 136

E Alarm lamp flashes. Message on the LCD "ERROR, FLASH UNLOAD"
Is a flash memory used?
Yes No
• Confirm the settings of the short plug T3 on the PMA board.
• Has the EPROM been selected?
Yes
• Replace the PMA.
• Can the printer recover after the program to the FLASH ROM is replaced?
No Yes
• End
• Replace the PMA board.
40496501TH Rev.1
1-2 setting: FLASH ROM selected
2-3 setting: EP ROM selected
No
• Make a proper selection for the short plug.
136