Ribbon Feed Assy - Oki PACEMARK 4410 Maintenance Manual

3.3.17 Ribbon Feed Assy

(1) Remove Cover Assy Access / Cover Assy Side (R) / Cover Assy Side (L) /Cover Assy Front
/ Frame Assy Rear / Plate Front (stuck). (See 3.3.1)
(2) Unplug the connector 1 from Junction Board (PRA Printed Board)(CN9) 7.
(3) Unscrew 2 screws 2 and remove Ribbon Feed Assy 3.
(4) Release the cord wrapping tie 4 and unscrew 2 screws 5, then remove the motor 6.
(5) For installation, reverse the removal procedure.
7
2
3
CN9
1
5
6
4
71
40496501TH Rev.1