Oki PACEMARK 4410 Maintenance Manual page 10

(5) Maximum Number of Dot Columns per Line
a) Graphics
Single Density
816
b) Text
Print Mode
ML, EPSON, IBM UTILITY
ML, EPSON, IBM NLQ
ML, EPSON, IBM HSD
(6) Maximun Number of Character per Line
Character Pitch (CPI)
ML EPSON IBM
(7) Printhead
Print method:
Number of dot wires:
Dot wire diameter:
(8) Line feed Speed
6 LPI spacing, one LF = 60 ms
8 LPI spacing, one LF = 52 ms
Continuous paper feed rate is 15 inches per second. (at head gap 1, 2)
(9) Line Feed Pitches
6 LPI 0.167 inch (4.23mm)
8 LPI 0.125 inch (3.175mm)
A variable line feed pitch of n/216 inch (integer n: 0 ≤ n ≤ 255) can also be specified. Also,
7/72 inch and n/72 inch can be specified.
PROPRINTER
EPSON
(10) Power Requirements
a) Input power
Single-phase AC
Voltage :
Frequency : 50/60Hz ±2%
b) Power consumption
Local Test : Max. 295 W (Rolling ASCII, Utility)
Idle :
c) AC power cable
Length :
Cable conforms to the UL, CSA, and European Standards.
40496501TH Rev.1
Double Density
1,632
Character Pitch (CP)
10 CPI
1,632
3,264
1,224
5 6 7.5
68 81 102
Impact dot matrix
9 wires x 2 rows
0.36mm(0.014inch)
n : 1 ≤ n ≤ 255
n : 1 ≤ n ≤ 255 (Cannot specify MSB : 1≤ n ≤ 127)
120VAC +5.5%, -15%
230 VAC ±15%
Max. 15W (Energy Star compliant)
Approximately 5.9 It (1.8 m)
Quadruple Density
3,264
12 CPI 15 CPI 17.1 CPI 20 CPI
1,958 2,448 2,798
3,917 4,896 5,596
1,468 1,836 2,098
8.5 10 12 15
116 136 163 204
3,264
6,528
2,448
17.1 20
233 272
10