Operator Board (Poa Printed Board) - Oki PACEMARK 4410 Maintenance Manual

3.3.16 Operator Board (POA Printed Board)

(1) Remove Cover Assy Access / Cover Assy Side (R) / Cover Assy Side (L) /Cover Assy Front
/ Frame Assy Rear / Plate Front (stuck). (See 3.3.1)
(2) Unplug the connector 2 from Operator Board (POA Printed Board)(CN1) 1.
(3) Unscrew 2 screws 3 and Remove Operator Block Assy 4.
(4) Unplug the connector 8 from Operator Board (POA Printed Board)(CN2) 1.
(5) Unscrew 3 screws 5 and release 3 claws, then remove Operator Board (POA Printed Board)
1 from Operator Block Assy 4.
(6) Unscrew 4 screws 6 and remove LCD Unit 7.
(7) For installation, reverse the removal procedure.
Claws
40496501TH Rev.1
View A
7
6
6
8
View A
4
3
2
1
5
3
70