Ip Channels - Bosch Divar 700 Series Installation And Operation Manual

Divar 700 Series
PTZ
–
–
Contrast
–
–
Enable audio input
–
–
–
6.2.2

IP Channels

The tabs 1-8 or 1-16 on a digital network recorder (9-16 or 17-32 on a digital hybrid recorder)
contain the settings for each of the IP cameras.
Figure 6.4 Configuration menu - Video & Audio - IP camera
Note:
An IP stream must only be connected to a single channel on a single Divar. There should be no
connection to any other device that could influence the settings of the IP device.
IP camera
If an IP connection has already been configured, the IP address, input type, and stream
number is displayed. If a connection has already been established, a video preview appears.
Bosch Security Systems
Enable PTZ when a controllable camera is connected.
By default, PTZ is disabled for all inputs.
Auto contrast - enabled to let the system automatically adjust the contrast for the video
input.
Contrast - can be set manually with the slider if Auto contrast is disabled.
Enable Audio input when an audio source is connected.
The Level meter indicates the strength of the audio input signal.
Use the Gain slider to adjust the input sensitivity.
Installation and Operation manual
Advanced configuration menu | en
F.01U.140.955 | v3.0 | 2009.11
61