Schedule; Setting The Dynamic Characteristics - Bosch Divar 700 Series Installation And Operation Manual

62 en | Advanced configuration menu
1.
2.
It can take a few seconds to establish a successful connection, after which a video preview
appears.
Input name
Enter a name for the selected input. The name can be up to 16 characters long.
Enable video input
This setting enables (default) or disables the video input.
PTZ
–
–
Note:
Refer to the data sheet for a list of supported IP cameras and encoders.
6.3

Schedule

6.3.1

Setting the dynamic characteristics

The settings in the Schedule menu provide the opportunity to tap the powerful functionality
of the unit. By spending some time in planning and setting up the profiles available, efficient
use of resources is achieved while effectively covering most types of working situations.
The profiles are scheduled in a weekly calendar, changing the recording and event behavior at
a particular day or time (for example, weekends or nights).
The six profiles that are defined in the Recording menu appear here.
F.01U.140.955 | v3.0 | 2009.11
Click Setup to configure or change an IP camera connection.
– IP address - enter the IP address of the IP camera.
– Input - Choose Camera if the channel is connected to a camera or a single-channel
encoder. Choose Video line 1-4 if the channel is connected to a multi-channel
encoder.
– Stream - enter the stream number.
– Encoder profile - Displays the encoder profile of the IP device used by the Divar.
– Username/Password - enter the username and password if applicable.
Press OK to confirm settings.
Enable PTZ when a controllable camera is connected.
By default, PTZ is disabled for all inputs.
Installation and Operation manual
Divar 700 Series
Bosch Security Systems