On-Screen Help; Unpacking; Package Contents - Bosch Divar 700 Series Installation And Operation Manual

Divar 700 series digital hybrid recorder / digital network recorder
Hide thumbs Also See for Divar 700 Series:
Table of Contents

Advertisement

Divar 700 Series
2.1.6

On-screen help

On-screen context-sensitive help is available. Just press the help
text associated with your current activity. Press the escape
2.2

Unpacking

Inspect the package for visible damage. If any items appear to have been damaged during
transport, notify the shipping company. Unpack carefully. This is electronic equipment and
should be handled with care to prevent damage to the unit. Do not attempt to use the unit if
any components are damaged. If any items are missing, notify your customer service
representative or Bosch Security Systems sales representative. The shipping carton is the
safest container in which to transport the unit. Save it and all packing materials for future use.
If the unit must be returned, use the original packing materials.
2.2.1

Package contents

Check for the following items:
Bosch Security Systems
Spot monitor output with sequencing, multiscreen, and OSD (hybrid versions)
Optional support for up to 8 (or 16) IP cameras on hybrid versions
Up to 32 IP cameras on network versions
Simultaneous recording and playback
Internal hard disk video storage (front replaceable by user)
10/100/1000Base-T Ethernet port for Ethernet connection and networking
External KBD keyboard connection
8 or 16 switching (alarm) inputs and 4 alarm outputs
Motion detection
Video loss detection
Audible alarm
Pan, tilt, and zoom camera control via RS485 and biphase
Two RS232 serial ports for serial communication
Local archiving via USB
Local archiving via built-in DVD writer (not all versions)
On-board RAID4 (optional)
Divar 700 Series unit
USB mouse
Quick installation guide
Divar 700 Series Installation and Operation manual (this manual)
A 25-pin D-type switching and alarm connector board
A 15-pin D-type connector board (used for Biphase PTZ connections)
A 3-pin screw terminal connector (used for RS485 PTZ connection)
Power supply cord
Shielded network cross-over cable (for service and testing purposes)
Rack mounting kit
A CD-ROM containing the software and manuals
Installation and Operation manual
Introduction | en
button to see the help
button to exit help.
F.01U.140.955 | v3.0 | 2009.11
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents