Event; General - Bosch Divar 700 Series Installation And Operation Manual

70 en | Advanced configuration menu
6.8

Event

Use the Event menu to specify the desired behavior for an active contact input, detected
motion, or video loss. The general behavior of events is also set here. Each of the six profiles
has a General, Contact, Motion and Video loss tab.
Figure 6.10 Configuration menu - Event - General
6.8.1

General

Auto acknowledge alarms
–
Alarm dwell time
–
Sound beeper on alarm
–
Sound beeper on video loss
–
Actions when entering this profile
Click Edit... to specify pre-positions for PTZ cameras when this profile is started.
–
Any actions that have been configured are listed.
F.01U.140.955 | v3.0 | 2009.11
Enable when alarms should be acknowledged automatically. By default, an alarm must be
manually acknowledged.
Set between 1 and 59 seconds to select the period during which the output relay and the
beeper remain active after activation of the alarm.
Enable an audible warning upon an alarm.
Enable an audible warning upon video loss.
Enter a pre-position number from 1-1023 for each of the PTZ cameras that should be
moved (PTZ must be enabled for corresponding camera input).
Installation and Operation manual
Divar 700 Series
Bosch Security Systems