Storage; Ip Filter - Bosch DIVAR 3000 Operation Manual

DIVAR 2000 / DIVAR 3000 / DIVAR
5000
Subject
This is the subject that will appear in all e-mail sent by the unit.
Encrypt type
Some mail servers require encryption to transmit e-mail. If required, use SSL or TLS
encryption when sending e-mail. If not required, select 'NONE'.
Attachment
Check this box to allow an attachment to email.
Health status update
Check this box to command the system to send out a test email to check the connection is
OK. This will be done at the regular interval set in the Hour field. A dialog box will appear to
display if the connection is OK or not.
Another option is to click <Test> to manually check the email connection.
8.2.8

Storage

First boot up the corresponding FTP server before activating this menu.
1.
2.
3.
4.
When a backup is running, the backup progress is displayed in a progress bar.
See also
–
8.2.9

IP filter

The system supports IPv4 and IPv6 address format.
Choose for access to 'Trusted' or 'Blocked' sites IP addresses. If you disable this function, all
IP addresses can access the current DVR.
Enable or disable the feature and then use <Add> to select IP address, IP section and MAC
address. Press <OK> to confirm.
Bosch Security Systems
Select the File format and type of recording.
Choose a location (FTP server, a SMB file server or an eSata disk). Use <Configure> to
setup the location.
Assign a schedule for the backup (weekday, start time, last number of days, time period
and which channels to backup). You can start the backup once a week or multiple times
per week.
Select <Apply> or <Save>.
Recording, page 43
Operation Manual
Settings | en 41
2016.09 | v1.0 | AM18-Q0717