Bosch Divar 700 Series Installation And Operation Manual page 45

46 en | Operating instructions
Events search criteria
–
–
–
–
–
Figure 5.8 Search menu - Smart motion
Smart motion search criteria
1.
–
–
–
–
2.
F.01U.140.955 | v3.0 | 2009.11
Under Start time and End time, fill in date and time values to determine the time span of
the search.
To set the Search direction, select Forward to search from start time to end time or
Backward to search from end time to start time.
Under Video inputs, check the inputs to search for (highlight the un-numbered box to
select all). The selected inputs are highlighted.
Under Search for check the boxes to search for contact, motion, video loss and system
events. Check the Alarms only box so that the search is restricted to alarm events.
Select Search to start the search.
Set the smart motion search parameters as follows:
Under Start time and End time, fill in date and time values to determine the time span of
the search.
To set the Search direction, select Forward to search from start time to end time or
Backward to search from end time to start time.
Adjust the Trigger level slider to set the level of motion that will be detected. Sliding to
the right raises sensitivity, sliding to the left lowers sensitivity. The highest value detects
even the slightest motion.
Select the input to search using Video input.
To define the motion sensitive area in the smart motion preview cameo window:
– Select Draw cells and draw in the motion cameo to add or increase detection areas.
– Select Erase cells and draw in the motion cameo to erase or reduce detection areas.
Installation and Operation manual
Divar 700 Series
Bosch Security Systems