Bosch Divar 700 Series Installation And Operation Manual page 49

50 en | Operating instructions
Figure 5.13 Configure monitors menu - Sequence
Sequence
Select the length of time a camera remains visible on screen (1 to 60 seconds) in the
Sequence dwell time field.
Use the the Add button to move camera inputs to the sequence list. Use the Move up or Move
down buttons to put them in the desired order. Use Remove to clear a single item from the
sequence list. Use Erase to clear all items from the sequence list.
Event display
Check the Contact inputs events, Motion detection events or Video loss alarms boxes to
display these events on the screen.
Set the length of time these events remain on the screen in the Display duration field (non-
alarm events only) and enter the number of lines to display in the event list.
F.01U.140.955 | v3.0 | 2009.11 Installation and Operation manual
Divar 700 Series
Bosch Security Systems