Network; Tcp/Ip; Streaming To Mobile Devices - Bosch DVR 440 Installation And Operation Manual

Hide thumbs Also See for DVR 440:

Table of Contents

en | Configuration menu

6.5

Network

6.5.1

Figure 6.16 Network - TCP/IP

6.5.2

The Real Time Streaming Protocol (RTSP) feature allows live video streaming over the

network.

Attention:

If you enable this feature (RTSP server to On) and the firewall on a ADSL router is opened,

anybody can view the cameras. There is no log-on user ID or password to protect a camera

live image.

AM18-Q0605 | v2.0 | 2012.04

Enable DHCP to have the IP address, subnet mask, and default gateway assigned

automatically by the network server.

–

If DHCP is disabled, fill in the IP address, the Subnet mask, the default Gateway,

and the Primary DNS server address. If required, change the default HTTP port no.

(80) to a new value.

Restrict the network Bandwidth limit by entering a value between 256 Kbps and

100 Mbps. If 256 or 512_Kbps is selected, the DVR automatically selects I-frame only

video at 1 IPS for transmission over the low bandwidth network connection.

(A video clip is not attached to an e-mail if 256 or 512_Kbps is selected.)

Enable the RTSP server to stream live video (for example, to a smart phone). If RTSP is

enabled (on), enter a TCP/IP port number (default port 554).

ICMP is set to Off by default (ping is not available). Set ICMP to On if you are using

Control Center software version 3.34 or lower).

Installation and Operation manual

Digital Video Recorder 440/480 Series

Bosch Security Systems

Table of Contents

Dvr 480 Dvr 440 / dvr 480