Mounting In The Expansion Area - Fujitsu PRIMECENTER M1 User Manual

Mounting in the expansion area

5.4 Mounting in the expansion area
19-inch rack components can be mounted vertically in the optional expansion
area to the left of the 19-inch area.
I
The expansion area is only available in 700 mm racks.
The following applies to symmetrical 700 mm racks:
Only 19-inch rack components with a height of 1 HU can be mounted.
The following applies to asymmetrical 700 mm racks:
Only 19-inch rack components with a height of 2 HU can be mounted.
The cable management (only possible in 700 mm asymmetrical racks) restricts
the depth of the components to 290 mm. Gaps that occur when you mount 1 HU
components must be covered.
40