Fujitsu PRIMECENTER M1 User Manual page 18

Important Information
V
CAUTION!
● The maximum transport weight may not exceed a specific maximum
(see table "Summary of all rack types" on page
For safety reasons, no more than one unit must be pulled out of
●
the rack at a time, otherwise the rack may tip over.
This is illustrated by the following pictograms:
Before mounting a server in the PRIMECENTER M1 19-inch rack,
●
remove all heavy and easily removable server components such as
hot-plug disks and power supply modules since this makes the server
lighter and easier to mount. Follow the instructions in the user manual
of the server.
If necessary, have other people help you mount the individual
●
components in the rack because of the weight involved.
● Before pushing extended telescopic rails back into the rack, pull the
ball cage of the telescopic rail forward as far as it will go.
● Install only system expansions that satisfy the requirements and rules
governing safety. If you install other expansions, you may damage the
system or violate these safety regulations. Information can be
obtained from customer service or your local sales office.
● If you cause a defect on the device by installing or exchanging system
expansions due to wrong handling, the warranty is invalidated.
The configurations available in the PRIMECENTER M1 19-inch rack
●
can carry a leakage current >3.5 mA. Therefore, a ground connection
must be established before connecting to the mains (see
"Power Distribution" on page
18
69).
24).
chapter