7.3.2.2
Installation options for 700 mm wide symmetrical racks
Rack height
Installation direction
vertically
42 HU
conditionally possible
24 HU
conditionally possible
Table 6: Installation options for asymmetrical racks
1
Installation is only possible on the rear side. Cable routing is restricted. Installation of cable
arms at the same height is not possible.
Performing the task
Ê Install the PDU brackets as described on
Figure 50: 10-way socket strip "Blade PDU" mounted in a 700 mm wide symmetrical rack
Ê Screw the socket strip with 2 screws onto the PDU brackets.
I
Installation is possible on both sides.
Installation direction
horizontally
1
Max. 2x with PDU kit 2 HU / 3 HU
1
Max. 2x with PDU kit 2 HU / 3 HU
page
71.
Power Distribution
81