Supported Memory; Table 2. Udimm Support Guidelines - Intel S1200V3RP Technical Product Specification

Intel® Server Board S1200V3RP TPS

The memory slots are named as Slot1 and Slot2 on each channel. Slot1 is the farthest
from the processor socket.

DIMMs are named to reflect the channel and slot in which they are installed:
Channel A, Slot1 is DIMM_A1.
-
- Channel A, Slot2 is DIMM_A2.
Channel B, Slot1 is DIMM_B1.
-
Channel B, Slot2 is DIMM_B2.
-
3.3.1

Supported Memory


Single Ranked x8 unbuffered ECC

Dual Ranked x8 unbuffered ECC
Ranks
Per
DIMM
Memory Capacity Per DIMM
and
Data
Width
SRx8
1GB 2GB
ECC
DRx8
2GB 4GB
ECC
Notes:
1. No support for RDIMMs.
2. No support for SODIMM.
3. All channels in a system run at the fastest common frequency.
4. Mixing ECC and non-ECC UDIMMs anywhere on the platform is not supported.
5. Static CLTT supported using BMC (requires ECC DIMMs with thermal sensor).
3.3.1.1 Memory Population Rules
Note: Although mixed DIMM configurations are supported, Intel
validation on systems that are configured with identical DIMMs installed.
The processor provides two channels of memory, each capable of supporting up to two DIMMs.

DIMMs are organized into physical slots on DDR3L memory channels that belong to
processor sockets.

The silk screened DIMM slot identifiers on the board provide information about the
channel. For example, DIMM_A1 is the first slot on Channel A on processor.

Slot1 must be populated first before Slot2, on either channel.

Channel A and Channel B are independent and are not required to have the same
number of DIMMs installed. Either channel may be used for a single-DIMM configuration.
Revision 1.2

Table 2. UDIMM Support Guidelines

Slot per Channel (SPC) and DIMM Per Channel (DPC)
1 Slot per Channel
1DPC
1.35V
4GB 1333, 1600
8GB 1333, 1600
Speed (MT/s) and Voltage Validated by
2 Slots per Channel
1DPC
1.35V
1333, 1600
1333, 1600
®
only performs platform
Functional Architecture
2DPC
1.35V
1333, 1600
1333, 1600
15