Oven - Care And Cleaning - AEG 49332I-MN User Manual

OVEN - CARE AND CLEANING

WARNING!
Refer to "Safety information"
chapter.
• Clean the front of the appliance with
a soft cloth with warm water and
cleaning agent.
• To clean metal surfaces, use a usual
cleaning agent
• Clean the oven interior after each
use. Then you can remove dirt more
easily and it does not burn on.
• Clean stubborn dirt with a special
oven cleaner.
• Clean all oven accessories after each
use and let them dry. Use a soft cloth
with warm water and a cleaning
agent.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a
dishwasher. It can destroy the non-
stick coating.
Stainless steel or aluminium
appliances
Clean the oven door with a wet
sponge only. Dry it with a soft
cloth.
Do not use steel wool, acids or
abrasive materials as they can
damage the oven surface. Clean
the oven control panel with the
same precautions.
CATALYTIC WALLS AND
ROOF
The walls and the roof with catalytic
coating are self-cleaning. They absorb
fat which collects on walls while the
oven operates.
To support this self-cleaning process,
heat the oven without any food
regularly:
• Turn the oven light on.
• Remove accessories from the oven.
• Select an oven function.
• Set the oven temperature to 250 °C
and let the oven operate for 1 hour.
• Clean the oven cavity with a soft and
damp sponge.
WARNING!
Do not attempt to clean the cat-
alytic surface with oven sprays,
abrasive cleaners, soap or other
cleaning agents. This will dam-
age the catalytic surface.
Discolouration of the catalytic
surface has no effect on the cat-
alytic properties.
SHELF SUPPORTS
You can remove the shelf supports to
clean the side walls.
ENGLISH
35