Expansion board options
The server supports PCI, PCI-X, and PCI Express expansion boards.
Removing the expansion slot cover
To install the component:
Power down the server (on page 24).
1.
Do one of the following:
2.
Open or remove the tower bezel, as needed
o
Extend the server from the rack (on page 24).
o
Remove the access panel (on page 26).
3.
Push the release latches on the expansion board retainer, and then pull the retainer out away from the
4.
chassis.
("Open or remove the tower
Hardware options installation 69
bezel" on page 25).