Appendix; Error Messages; 7-Segment Display Replacement Parts - Rice Lake LaserLight Installation & Operation Manual

5.0

Appendix

5.1

Error Messages

The LaserLight remote display provides several error messages. When an error occurs, the message is shown on
the display.
NOTE: Some of the actual error messages displayed by the remote display are cryptic and are represented in Table 5-1
as closely as possible with plain text.
Table 5-1 lists error messages shown by the
7-Segment Matrix Display
Display Message
Message 8-Character
LError LError
WError WError
Reset Reset
RError RError
5.2

7-Segment Display Replacement Parts

Table 5-2 lists selected replacement parts for the
Reference Number Part Number
---
---
26
30
31
32
34
---
49
LaserLight
Matrix Display
Message
12-Character Meaning
Learn Error Auto Learn error
Write Error Indicator code
Reset Config Invalid settings
Range Error Range Error
Table 5-1. Error Messages
LaserLight
40672 Ground wire, 9 inch (1)
72992 Enclosure, steel (1)
72993 Plate, bottom gusset (1)
75848 Component plate, vertical (1)
74880 Primary display board (1)
74881 Secondary display board (1)
76246 6-position cable (1)
72995 Lens, optically filtering (1)
72994 Gasket, mounting plate (1)
Table 5-2. Selected Replacement Parts
remote display and their meaning.
Auto Learn failed
Write error. Could not save menu settings to the serial
EEPROM
Invalid settings upon power up. All settings reset to their
default state.
When the Rice Lake format goes over or under range.
remote displays.
Description
Cause
Model Figure Number
4" model Figure 5-3 33
Figure 5-2 32
Appendix 29