Table of Contents
Advertisement
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
Class
Flowlabel
Source IPv6 Address
Destination IPv6
Address
To view the settings of a previously correctly configured rule, click
following screen:
Entering a value between 0 and 255 will instruct the Switch to examine the class field
of the IPv6 header. This class field is a part of the packet header that is similar to the
Type of Service (ToS) or Precedence bits field of IPv4.
Configuring this field, in hex form, will instruct the Switch to examine the flow label
field of the IPv6 header. This flow label field is used by a source to label sequences of
packets such as non-default quality of service or real time service packets.
The user may specify an IP address mask for the source IPv6 address by entering the
IP address mask, in hex form.
The user may specify an IP address mask for the destination IPv6 address by and
entering the IP address mask, in hex form.
Figure 6- 92. CPU Access Rule Display window (IPv6)
in the CPU Access Rule Table to view the
130
Advertisement
Table of Contents
