Table of Contents
Advertisement
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
If Area ID is selected as the browse method, it is necessary to enter the IP address in the Area ID field, and then click
Find.
If Adv. Router ID is selected, it is necessary to enter the IP address in the Advertisement Router ID field, and then click
Find.
If LSDB is selected, it is necessary to select the type of link state (RtrLink, NetLink, Summary, ASSummary and ASExtLink)
in the LSDB Type field, and then click Find.
The following fields are displayed in the OSPF LSDB Table:
Parameter
Area ID
LSDB Type
Adv. Router ID
Link State ID
Cost
Sequence
Description
Allows the entry of an OSPF Area ID. This Area ID will then be used to search the
table, and display an entry − if there is one.
Displays which one of eight types of link advertisements by which the current link was
discovered by the Switch: All, Router link (RTRLink), Network link (NETLink),
Summary link (Summary), Autonomous System link (ASSummary), Autonomous
System external link (ASExternal), MCGLink (Multicast Group), and NSSA (Not So
Stubby Area)
Displays the Advertising Router's ID.
This field identifies the portion of the Internet environment that is being described by
the advertisement. The contents of this field depend on the advertisement's LS type.
LS Type
Link State ID
____________________________________________
1
The originating router's Router ID.
2
The IP interface address of the network's Designated Router.
3
The destination network's IP address.
4
The Router ID of the described AS boundary router.
Displays the cost of the table entry.
Displays a sequence number corresponding to number of times the current link has
been advertised as changed.
285
Advertisement
Table of Contents
