xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
Menu Bar
The Single IP Management window contains a menu bar for device configurations, as seen below.
The five menus on the menu bar are as follows.
File
Print Setup - will view the image to be printed.
•
Print Topology - will print the topology map.
•
Preference - will set display properties, such as polling interval, and the views to open at SIM startup.
•
Group
Add to group - add a candidate to a group. Clicking this option will reveal the following screen for the user to
•
enter a password for authentication from the Candidate Switch before being added to the SIM group. Click OK
to enter the password or Cancel to exit the window.
Remove from Group - remove an MS from the group.
•
Device
Configure - will open the web manager for the specific device.
•
View
Refresh - update the views with the latest status.
•
Topology - display the Topology view.
•
Help
About - Will display the SIM information, including the current SIM version.
•
NOTE: Upon this firmware release, some functions of the SIM can only be
configured through the Command Line Interface. See the xStack DGS/DXS-3300
Series CLI Manual for more information on SIM and its configurations.
Figure 11- 17. Menu Bar of the Topology View
Figure 11- 18. Input password window
317