D-Link Xstack DGS-3300 Series User Manual page 94

Layer 3 stackable gigabit ethernet switch
Hide thumbs Also See for Xstack DGS-3300 Series:
Table of Contents

Advertisement

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
ip – Using this parameter will instruct the Switch to forward packets to this VLAN if the
tag in the packet header is concurrent with this protocol. This packet header information
is based on the Ethernet protocol.
rarp - Using this parameter will instruct the Switch to forward packets to this VLAN if the
tag in the packet header is concurrent with this protocol. This packet header information
is defined by the Reverse Address Resolution (RARP) Protocol.
ipx802dot3 - Using this parameter will instruct the Switch to forward packets to this
VLAN if the tag in the packet header is concurrent with this protocol. This packet header
information is defined by Novell NetWare 802.3 (IPX - Internet Packet Exchange).
ipx802dot2 - Using this parameter will instruct the Switch to forward packets to this
VLAN if the tag in the packet header is concurrent with this protocol. This packet header
information is defined by Novell NetWare 802.2 (IPX - Internet Packet Exchange).
ipxSnap - Using this parameter will instruct the Switch to forward packets to this VLAN if
the tag in the packet header is concurrent with this protocol. This packet header
information is defined by Novell and the Sub Network Access Protocol (SNAP).
ipxEthernet2 - Using this parameter will instruct the Switch to forward packets to this
VLAN if the tag in the packet header is concurrent with this protocol. This packet header
information is defined by Novell Ethernet II Protocol.
appleTalk - Using this parameter will instruct the Switch to forward packets to this VLAN
if the tag in the packet header is concurrent with this protocol. This packet header
information is defined by the AppleTalk protocol.
decLAT - Using this parameter will instruct the Switch to forward packets to this VLAN if
the tag in the packet header is concurrent with this protocol. This packet header
information is defined by the Digital Equipment Corporation (DEC) Local Area Transport
(LAT) protocol.
decOther - Using this parameter will instruct the Switch to forward packets to this VLAN
if the tag in the packet header is concurrent with this protocol. This packet header
information is defined by the Digital Equipment Corporation (DEC) Protocol.
sna802dot2 - Using this parameter will instruct the Switch to forward packets to this
VLAN if the tag in the packet header is concurrent with this protocol. This packet header
information is defined by the Systems Network Architecture (SNA) 802.2 Protocol.
snaEthernet2 - Using this parameter will instruct the Switch to forward packets to this
VLAN if the tag in the packet header is concurrent with this protocol. This packet header
information is defined by the Systems Network Architecture (SNA) Ethernet II Protocol.
netBios - Using this parameter will instruct the Switch to forward packets to this VLAN if
the tag in the packet header is concurrent with this protocol. This packet header
information is defined by the NetBIOS Protocol.
xns - Using this parameter will instruct the Switch to forward packets to this VLAN if the
tag in the packet header is concurrent with this protocol. This packet header information
is defined by the Xerox Network Systems (XNS) Protocol.
vines - Using this parameter will instruct the Switch to forward packets to this VLAN if
the tag in the packet header is concurrent with this protocol. This packet header
information is defined by the Banyan Virtual Integrated Network Service (VINES)
Protocol.
ipV6 - Using this parameter will instruct the Switch to forward packets to this VLAN if the
tag in the packet header is concurrent with this protocol. This packet header information
is defined by the Internet Protocol Version 6 (IPv6) Protocol.
userDefined - Using this parameter will instruct the Switch to forward packets to this
VLAN if the tag in the packet header is concurrent with this protocol defined by the user.
This packet header information is defined by entering the following information:
User Defined Pid - Specifies that the VLAN will only accept packets with this
79

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack dxs-3300 series

Table of Contents