Table of Contents
Advertisement
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
Figure 6- 119. Current and New Route Preference Settings window
The following fields can be viewed or set:
Parameter
RIP (1-999)
OSPF Intra (1-999)
STATIC (1-999)
OSPF Inter (1-999)
OSPF ExtT1 (1-999)
OSPF ExtT2 (1-999)
Click Apply to implement changes made.
Description
Enter a value between 1 and 999 to set the route preference for RIP. The lower the
value, the higher the chance the specified protocol will be chosen as the best path for
routing packets. The default value is 100.
Enter a value between 1 and 999 to set the route preference for OSPF Intra. The
lower the value, the higher the chance the specified protocol will be chosen as the
best path for routing packets. The default value is 80.
Enter a value between 1 and 999 to set the route preference for Static. The lower the
value, the higher the chance the specified protocol will be chosen as the best path for
routing packets. The default value is 60.
Enter a value between 1 and 999 to set the route preference for OSPF Inter. The
lower the value, the higher the chance the specified protocol will be chosen as the
best path for routing packets. The default value is 90.
Enter a value between 1 and 999 to set the route preference for OSPF ExtT1. The
lower the value, the higher the chance the specified protocol will be chosen as the
best path for routing packets. The default value is 110.
Enter a value between 1 and 999 to set the route preference for OSPF ExtT2. The
lower the value, the higher the chance the specified protocol will be chosen as the
best path for routing packets. The default value is 115.
154
Advertisement
Table of Contents
