D-Link Xstack DGS-3300 Series User Manual page 117

xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
The page shown below is the IP Access Profile Configuration page.
The following parameters can be set, for IP:
Parameter
Profile ID (1-8)
Type
VLAN
Source IP Mask
Figure 6- 60. Access Profile Configuration (IP) window
Description
Type in a unique identifier number for this profile set. This value can be set from 1 - 8.
Select profile based on Ethernet (MAC Address), IP address, Packet Content Mask or
IPv6. This will change the menu according to the requirements for the type of profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each
•
packet header.
Select IP to instruct the Switch to examine the IP address in each frame's
•
header.
Select Packet Content Mask to specify a mask to hide the content of the
•
packet header.
Select IPv6 to instruct the Switch to examine the IPv6 part of each packet
•
header.
Selecting this option instructs the Switch to examine the VLAN part of each packet
header and use this as the, or part of the criterion for forwarding.
Enter an IP address mask for the source IP address.
102