Table of Contents
Advertisement
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual
802.1p Default Priority
The Switch allows the assignment of a default 802.1p priority to each port on the Switch. In the Configuration folder open
the QoS folder and click 802.1p Default Priority, to view the screen shown below.
Figure 6- 50. 802.1p Default Priority and the 802.1p Default Priority for Unit 1 window
This page allows the user to assign a default 802.1p priority to any given port on the Switch. The priority tags are
numbered from 0, the lowest priority, to 7, the highest priority. To implement a new default priority, choose the Switch of
the Switch stack to be configured by using the Unit pull-down menu, choose a port range by using the From and To pull-
down menus and then insert a priority value, from 0-7 in the Priority field. Click Apply to implement settings made.
92
Advertisement
Table of Contents
