Rebooting The System - IBM N Series Hardware Manual

16.2.3 Rebooting the system

The System Storage N series systems can be rebooted from the command line or from the
NSM interface.
Rebooting from the CLI halts the N series and then restarts it as shown in Example 16-10.
Example 16-10 Rebooting from the command-line interface
[root@itso3775 node1]# reboot
Broadcast message from root (pts/2) (Thu Sep 8 13:23:47 2005):
The system is going down for reboot NOW!
Network File System (NFS) clients can maintain use of a file over a halt or reboot because
NFS is a
the -t option to allow users time before the shutdown to save their work.
Depending on the shutdown message settings, CIFS clients might receive messages such as
those shown in Figure 16-3 on page 201.
204
IBM System Storage N series Hardware Guide
stateless
protocol. CIFS, FCP, and iSCSI clients behave differently. Therefore, use