IBM N Series Hardware Manual page 220

System storage
Hide thumbs Also See for N Series:
Table of Contents

Advertisement

Common Internet File System (CIFS) services
The cifs sessions command reports open sessions to the IBM System Storage N series
storage system (Example 16-3).
Example 16-3 List open CIFS sessions
itsosj-n1> cifs sessions
Server Registers as 'ITSO-N1' in workgroup 'WORKGROUP'
Root volume language is not set. Use vol lang.
WINS Server: 9.1.38.12
Using Local Users authentication
====================================================
PC IP(PC Name) (user)
9.1.57.45() (ITSO-N1\administrator - root) (using security signatures)
9.1.39.107() (ITSO-N1\administrator - root) (using security signatures)
itsosj-n1>
With the IBM System Storage N series storage systems, you can specify which users receive
CIFS shutdown messages. By issuing the cifs terminate command, Data ONTAP, by
default, sends a message to all open client connections. This setting can be changed by
issuing the following command:
options cifs.shutdown_msg_level 0 | 1 | 2
The options are:
0:
Never send CIFS shutdown messages.
Send CIFS messages to clients connected and with open files only.
1:
2:
Send CIFS messages to all open connections (default).
The cifs terminate command shuts down CIFS, ends CIFS service for a volume, or logs off
a single station. The -t option can be used to specify a delay interval in minutes before CIFS
stops as shown in Example 16-4.
Example 16-4 The cifs terminate -t command
itsosj-n1> cifs terminate -t 3
Total number of connected CIFS users: 1
Total number of open CIFS files: 0
Warning: Terminating CIFS service while files are open may cause data loss!!
3 minutes left until termination (^C to abort)...
2 minutes left until termination (^C to abort)...
1 minute left until termination (^C to abort)...
CIFS local server is shutting down...
CIFS local server has shut down...
itsosj-n1>
You can even select single workstations for which the CIFS service should stop as shown in
Example 16-5.
Example 16-5 The cifs terminate command for a single workstation
itsosj-n1> cifs terminate -t 3 workstation_01
3 minutes left until termination (^C to abort)...
2 minutes left until termination (^C to abort)...
1 minute left until termination (^C to abort)...
200
IBM System Storage N series Hardware Guide
#shares
#files
1
0
3
0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents