IBM N Series Hardware Manual page 64

Weight
AC Power
b
BTU/hr
Controller configuration
Processor
Memory
NVRAM
Fibre Channel ports
Exp Slots
Ethernet ports
SAS ports
Max Capacity TB
(7.3.x / 8.0.x / 8.1.x)
Number of disk drives
Max Shelves
EXN3500 / EXN3000 /
EXN4000
Max Aggregate
(7.3.x / 8.0.x / 8.1.x)
Max FlexVol Size
(7.3.x / 8.0.x / 8.1.x)
Data ONTAP
(minimum release)
a. AC Power values shown are based on typical system
values with two power supply units.
b. Thermal dissipation values shown are based on typical
system values.
c. N7950T embedded Fibre Channel ports and Fibre Channel
ports on the vertical FC system boards are considered
on-board ports. They can be set as target or initiators and
support operation at 2, 4, or 8 Gb speeds. Operation at
1 Gb speeds is not supported.
d. The number of onboard SAS ports differs based on the
configuration.
e. System capacity is calculated using base 10 arithmetic
(1TB=1,000,000,000,000 bytes) and is derived based on
the type, size, and number of drives.
f. Max capacity shown can be achieved only by using 3 TB
drives under Data ONTAP 8.0.2 or greater.
g. Max capacity shown can be achieved only by using 3 TB
drives under Data ONTAP 8.0.2 or greater.
44
IBM System Storage N series Hardware Guide
N7950T
251.4 lbs (114 kg)
a
13.8A @100V
7A @200V
4540 @100V
4404 @200V
Dual Active/Active with IOXM
4x 64-bit six core
192 GB
8 GB
8 - 32
8 Gb SFP+
24 PCIe
4x GbE RJ45
8x 10 GbE SFP+
0 - 24
6 Gb QSFP
e
h
c
d
f g
-/4320 /4320
1440
60/60/84
-/100TB/162TB
-/100TB/100TB
8.0.1, 8.1