7. Press Esc to return to the main configuration menu. You are now ready to configure your
boot devices. Select 1 to configure the boot devices as shown in Figure 18-14.
Tip: The Emulex adapter supports FC_AL (public and private loop) and fabric
point-to-point. During initialization, the adapter determines the appropriate network
topology and scans for all possible target devices.
Figure 18-14 Adapter 02 panel
8. The eight boot entries are zero by default. The primary boot device is listed first, it is the
first bootable device. Select a boot entry to configure and select 1 as shown in
Figure 18-15.
Figure 18-15 Configure boot device panel
232
IBM System Storage N series Hardware Guide